DrayTek Vigor 100 ADSL2+ Ethernet Modem provides the secondary device with a real routed IP connection and has an ability to manage the connection fully and it is setup easily. It is not configured just plugged in and sets up the PC or router. The true public IP address is straight through the firewall or router which completes the control of ISP connections. It is a compact and portable ADSL2+ type of modem which is new and works fast and supports the upgradeable firmware.

DrayTek Vigor 100 ADSL2+ Ethernet Modem is an true ADSL modem with an Ethernet connection. Ethernet connections are used for client whether they use in home or office. Ethernet is a single cable which operates with the local area network. It is more reliable than other ports. Normally, it does not require any set up of configurations. It has a ADSL parameters which are preset for UK parameters that can be adjusted according to your convenience. DrayTek Modem has PPPoE and PPPoA bridging. PPPoE stands for Point-to-point over Ethernet which transfers the PPP traffic over Ethernet connections. PPPoA is Point-to-point over ATM which is very similar to PPPoE and communicates with ADSL standards mostly at hardware level.

DrayTek Vigor 100 ADSL2+ Ethernet Modem is connected with a devices as firewall, router or PC which is logged into the Internet directly and it fully controls over the ADSL connections which makes this modem as a unique product. With PPPoE client facility, it includes PCs and most of the Ethernet WAN routers. It has a ADSL compatibility as ITU-T G.992.1 G.DMT which has speed for downstream up to 8 Mpbs, ITU-T G.992.5 ADSL2+ which has downstream speed up to 24 Mbps and ITU-G.992.3 ADSL2 G.dmt.bis has downstream speed up to 12 Mbps. This new ethernet modem has a rear panel sockets and controls are RJ45, Power On or Off, Reset, ADSL and Power In. It is supplied with AC or DC PSU, ADSL line cable with RJ11 and 1.8M and Ethernet cable with RJ 45 and 1.8 M. DrayTek Vigor 100 ADSL2+ Ethernet Modem is wall mounted.